Minisport
|
Minisport |
 
|
GBC138- BRAKE CALIPER 8.4" DISC L/H / LC6108 RECON Genuine AP, standard cast iron calipers for the Mini with 12" wheels with 8.4" discs; Left hand side. Looks new but boxed as remanufactured by the original manufacturer Automotive Products. These were fitted to Rover's, mokes and LS minis. Price:
Mini 8.4 alloy black 4 pot brake calipers, for use on 8.4" SOLID disc only *SALE* Pair of 4-pot alloy calipers for 8.4" diameter brake discs with 12" (or bigger) wheels. Kit includes pad retaining clips and pins, but not brake pads. The advantage of alloy calipers is that they dissipate heat quicker, reducing fluid boiling. The design also helps to expel pad dust and heat from the contact area. The 4 pot design provide a much more uniform pressure and far superior braking. Price:
Mini front wheel cylinder kit, (4x 15/16) wheel cylinders Other wheel cylinders are available see our store. Price:
P6908/P6909- Mini front wheel cylinder kit, (4x 1") wheel cylinders One inch is a bigger wheel cylinder and will result in a better stopping brake setup than the 15/16, we recommend and fit these wheel cylinders to ALL our brake jobs in our workshop. You will require 2 bleed nipples (as they are not supplied in this kit) but you can reuse your old ones if they are still good. Price:
37H3833 - Mini front wheel cylinder gasket This gasket is fitted between the backing plate and the wheel cylinder on any model that had 2 front wheel cylinders per side. These are not necessay, but will prevent dirt/dust and water getting in. Price:
3H2428- BLEED NIPPLE 3/8 UNF THREAD Bleed nipple for front wheel cylinders on twin leading shoe type set ups,this is where you have 2 cylinders per hub as single laeding type which had one cylinder only per hub, also will fit front calipers on disc assemblies Price:
37H2013- Twin leading front backing plate (R/H) Genuine R/H original AP backplate- If the brake adjusters on your front twin-leading brakes have seized up or are worn out, there is no real repair short of replacing this backplate! Price:
37H2014- Twin leading front backing plate (L/H) Genuine L/H original AP backplate- If the brake adjusters on your front twin-leading brakes have seized up or are worn out, there is no real repair short of replacing this backplate! Price:
P5098- 850 Front wheel cylinder These front wheel cylinders are unique to mini 850 models, they are similar (not the same) to rear ones, they are hard to find. These have been fully overhauled and reconditioned- a $50 per wheel cylinder refundable deposit applies to this item, unless you send your old ones to us first for inspection Price:
4411- Mini rear wheel cylinder kit, suit drum brake (front) mini These are the correct size to run if you are running drum brakes on the front end, please note that these are REAR wheel cylinders, Other wheel cylinders are available (Mini moke/drum brake mini's) see our store. Price:
4412- Mini rear wheel cylinder kit, suit disc brake/850 Mini Other wheel cylinders are available (Mini moke/drum brake mini's) see our store. Price:
Mini rear wheel cylinder kit, suit drum brake mokes Rear wheel cylinders to suit Mini mokes. (11/16) Other wheel cylinders are available (coopers or 850/drum brake mini's) see our store Price:
17H7949- Mini rear wheel cylinder retaining clip This clip holds the rear wheel cylinder to the backing plates, they are the same on all models and do not differ, they where also fitted on the front of 850 single wheel cylinder brake setups. Easy to break! Price:
BAU1790- 7MM METRIC BLEED SCREW FOR METRO CALIPER AND REAR WHEEL CYLINDER 7MM METRIC BLEED SCREW FOR METRO CALIPER AND REAR WHEEL CYLINDER Price:
This is a replacement front rubber brake hose to suit your mini (either drum brake or disc brake models) Price:
|
 |
