Minisport
|
Minisport |
 
|
21A2137- Mini L/H fuel tank, Standard type (Australian Spec) This is a direct replacement for the L/H fuel tank. This is for the type that takes the 'knock in' fuel sender 9not the screw in 850 type) This tank is the Standard Australian spec tank (not long range) *Extra freight will be required to ensure it's safe arrival* Price:
ARP1043- Mini STD replacement Left hand Fuel tank (long range) This is the large fuel tank as fitted to some models in Australia and England, these are easily fitted and will make your fuel go that little bit further. Capacity is 7.5 gallons or 34 litres capacity compared to the original 5.5gallons. Sender unit fixing is twist and turn type **Extra shipping will be required** Price:
2A2069 - MINI TANK SEALING RING Sponge like cushioning seal for all minis between the tank neck and the body plus the minivan/estat/pickup petrol tank where it goes between and tank and the the floor/shroud, normally only used on Vans in Australia, but can be used on normal minis if you choose Price:
PETROL TANK JOINING PIPE, R/H TANK TO ORIGINAL L/H TANK Cooper S right hand tank link pipe. Needs 5/16"bore size hose Price:
21A1329- Mini R/H petrol tank support bracket/location plate (under the tank) Platform that sits in the boot floor for the r/h extra tank to sit on Price:
MS82- PETROL TANK, R/H TANK FITTING KIT Want to add a right-hand tank to your one-tank Mini? This kit includes everything, except the tank, to do it. Included are retaining straps, support brackets that mount to the rear seat back and boot floor, between-tank metal fuel line and braided fuel hose. ***NO TANK INCLUDED, ONLY FITTING KIT AS SHOWN*** Price:
R/H plastic fuel tank This is a R/H plastic 'replica' fuel tank, these are a great idea when doing a cooper S replica (or you just want more fuel in your car) they have a metal filler neck so from the outside it looks like it was supposed to be there. You will require a MS82 fitting kit to fit this (minor alteration will be needed to the joining pipe) Price:
Fuel tank metal- R/H fuel tank made from steel (like original) This tank has been long sort after, it is a almost identical replica (in steel) of the original steel cooper s/Clubman GT fuel tank. If you are doing a restoration and want the authentic thing, then this you can not go past **Extra shipping will apply due to its size, we will contact you with this** Price:
21A1401- Mini fuel tank drain tube (use a 7/16" tube spanner to undo/redo) This is the drain tube that fits on the bottom of many fuel tanks. It uses a 7/16" tube spanner to undo. Price:
21A291MS- PETROL TANK FOR VAN PICKUP & ESTATE This reproduction tank fits Estate/Van and Pickup. Because of the outside location of these tanks, below the rear cargo area, they seem to take a real beating. When replacing the tank you will also require 21A291FK. Do not forget to replace the 2A2069 sealing ring on the neck bottom and the 14A7057 top neck to body grommet seal. Price:
21A304- PETROL TANK LARGE PLASTIC NUT FOR 21A291 VAN/ESTATE TANK Hard to find *RARE* White plastic nut (you will require 3) for the mini van/estate/pickup petrol tank-these larger ones fit at the rear. Price:
21A291FK- Mini van petrol tank fitting kit- Fitting kit to attach van fuel tank into any van. You get 3x large plugs, 3 small plugs and 6 screws Price:
|
 |
