Minisport
|
Minisport |
 
|
HYA2805- Mini morris door striker plate. 'windup doors' This door striker is made for the windup 'aussie' doors, this will suit almost all minis from 66-71. These are made in Australia and are limited stock at this time. Does either left or right hand side. Price:
211081- MINI BOOT FLAP SCREW 3/16 (also can be used on Australian door strikers) This is a boot flap screw that holds the boot flap hinge onto the car, there are 6 of these required per car. the thread is 3/16th of an Inch. these screws can be used on the australian door strikers HYA2805 (you will need to run a 3/16 tap) Price:
Morris mini door spring 'Snail spring' This spring holds the outer door handle up to the rubber stopper keeping the outer handle totally horizontal, fits inside the door and goes around the shaft of the outer door handle Price:
24A1140- Early mini door handle. Outer R/H Door handle to fit Mini 850 or cooper (not s) comes with key lock and key. will NOT fit windup window cars. Price:
DOOR HANDLE KIT INC BOOT HANDLE FOR PRE 1966 MK1 Full Mk1 door handle set with 2 front door locking handles and boot handle with matching keys. SLIDING WINDOW DOORS ONLY! Price:
RMZ316- DOOR LOCK SCREW (SLIDING WINDOWS) On sliding window type MK1/2 doors the door locks are held on by these 3 screws. Price:
RMP307- SCREW FOR WINDOW BOSS/CZA7109 This is the chrome screw that fits the 14A8151 catch boss on sliding window minis. Also fits the door winder handle on early wind up window cars. Price:
14A8151- WINDOW CATCH RETAINING BOSS (SLIDE WINDOW) This is the chrome button type boss on the sliding window minis to hold the window catch -see RMP307 for chrome screw to retain this boss Price:
MSSK015- WINDOW CATCH PLASTIC SET (850) Sliding window Mini models all must now use these black plastic locks for the windows. This special kit includes a complete set of all the pieces: 4 latches, rubber seals, screws and chrome nuts. Price:
21A2145- LOCK R/H DOOR RHD NO SAFETY CATCH If your MKI (sliding window) mini suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. This is the right side latch for a right hand drive car. Screws for these are RMZ316 Price:
21A2144- LOCK L/H DOOR RHD NO SAFETY CATCH If your MKI (sliding window) mini suffers from terminal "door handle sag" it is quite possible that the inside door latch mechanisms are tired. This is the Left side latch for a right hand drive car. Screws for these are RMZ316 Price:
14A6833- DOOR STRIKER NYLON BUFFER FOR MK1 (850 SLIDING WINDOWS) Price:
14A6835- Mini door striker plate All minis with sliding type windows had this type of metal cover for the door striker plate Price:
DOOR STRIKER PLATE ON BODY MK1 (850) The door striker plate holds the door shut, but the nylon guide block 14A6833 actually supports the weight when the door is closed. When one wears it typically takes the other with it, so replace both. Price:
14A7176- R/H DOOR KICK PLATE SUIT 850 NOT AUSSIE CARS This polished aluminum corner plate fits over the leading edge of the MKI (slide window) door pocket to add protection and class. L/H side plate is supplied, if you want the Left hand see 14A7177. Price:
|
 |
.jpg)
