Minisport
|
Minisport |
 
|
8B12396B- HOLE PLUG (20mm) IN STAINLESS STEEL Stainless steel plug with nut fittings so they seal properly and cannot be stolen will cover hole of around 20mm- can be used for an aray of uses, like sealing firewall where a rubber grommet will just not do. If cleaned regularly they will stay smart and bright for a lifetime. Sold individually Price:
CAM5969- GROMMET FOR HEATER or CHOKE CABLE the factory fitted 1/2"wide grommet for the choke and heater cable for 11/32"hole. Price:
5L23- GROMMET WIRING LOOM 1"HOLE for oil temp gauges Large grommet to fit 1"approx holes in bulkhead for items that need to be able to flex and move such as capillary tubes and oil pipes.7/32" hole size Price:
22A285- REMOTE CONTROL EXTENSION 1/2 MOON PLUG Fitted in the gearbox remote control this half moon seal butted up against the gearbox remote housing. Price:
14A7081- PLUG BOOT FLOOR / RADIUS ARM SHROUD Special shape and strength 1" rubber floor plug. This plug goes on the rear trailing arm grease points and in any 1inch hole in your car floor. Price:
Clubman outer door lock seal (X1) This goes in between the body of the clubman outer door lock and the door, the seal keeps the water out of your door locks aswell as adding extra tension onto the retaining clip. When replacing this we also suggest replacing the retaining clip. Price:
Morris mini door handle gasket This gasket goes in between the morris outer door handle and the painted body of your car. They are a must to prevent water from destroying your locks and doors (water damage and rust) Price:
Morris mini rubber outer door handle rest/stopper (X1) This rubber block is what your outer door handle rests on when your doors are closed, the rest is one of the unique parts of a mini. If your outer handle is not resting on the stop you may have a broken door snail spring. Price:
Mini boot handle rubber seal The rubber stops the rain from getting into your boot handle, This rubber seal is 10 times better than the English gaskets and really will work. (Also fitted to van rear doors) Price:
MINI CLUBMAN SIDE INDICATOR/SIDELIGHT GASKET SET You get, one sidelight bace to body gasket and one sidelight lense to bace gasket. A must to stop water entering your sidelights on your clubby. Price:
Early mini (pre 71) tail ight gasket set. This kit gives you the gasket that goes between the tail light to the body of the car and the gasket that goes between the lense and the bace of the tail light. (does not suit clubman, see store for them) This kit does ONE side Price:
37H2691/2- MK4 REAR LAMP SEAL L/H and R/H. (REVERSE LAMP TYPE) Fitted to cars with the reverse lens built into the rear lamp which became standard in 1976 this is the L/H and R/H seal between the lamp and the car body Price:
XFH100460- REAR LENS TO LAMP BODY SEAL FOR ALL MK4 ON, (SOLD SINGLE) If you have rear lamps with integrated reverse lights this gasket fits between the lens and the lamp body Price:
AYG3175 - 22A608 Mini gearchange boot, these are the heavy duty thick rubber type, do not be fooled as there are cheaper variants available but they will last only 1/4 of the time as one of these (due to the tickness of the rubber) Fits all models Price:
CZH4278- GEAR LEVER GAITER ROD CHANGE GENUINE The actual gear lever gaiter screwed to the floor to stop draughs coming up. For rod change gearbox models only (this is the rover boot, Australian boot is 22A608). Price:
|
 |
.jpg)
.jpg)
.jpg)
.jpg)
