Minisport
|
Minisport |
 
|
FS006R- FLOORPAN FRONT TO REAR R/H PRE ROD CHANGE Floor pan front to rear for the right hand side only to the floor shape before rod change cars---ideal for MK1/2 restoration (no hydro lines) Price:
FS006L- FLOORPAN FRONT TO REAR L/H PRE ROD CHANGE Floor pan front to rear for the Left hand side only to the floor shape before rod change cars---ideal for MK1/2 restoration (no hydro lines) Price:
HMP441009- REAR BACK PANEL LOWER REPAIR BELOW LIGHTS Genuine repair panel which is about 2.52 high from bumper mounting seam and includes hinge holes and lower part of bootlid surround channel. Full width panel for any saloon. Price:
HMP441046- REAR PANEL COMPLETE WITH MK1 LAMP CONVERSION Complete rear back panel section from roof to bumper valance with MK1/2 lamp holes, bootlid and backlight holes to fit all models from 1967 to 2000. This is a great repair section which can be cut to suit each individual car as it is very rare for the upper window section to be rotten. Please be aware that these back sections will require the english (large) rear window screens, these are readily available and should not cost more than $50. **EXTRA FREIGHT/PACKAGING WILL BE REQUIRED** Price:
HMP441019 Genuine rear lower back panel for leyland/rover on which goes up as far as lower edge of backlight seal ridge *Extra postage cost may be required as this is an exceptionally large object and will have to be freighted via TNT* Price:
MS54- BOOT FLOOR PANEL REAR SECTION ONLY ABOUT 9-10" DEEP This 9.5" rear section of the boot floor is ideal for collision or rust repair. Price:
ALA5513- Boot floor to back seat, no battery box when that nasty rust gets in it can cause all sorts of havick, this rust repair panel will help you out. This boot and seat pan section does not have the battery box fitted. can cut back seat area off to reduce freight. *EXTRA POST ITEM* Price:
The boot floor section extends from the rear bumper lip to the rear seat pan -- standard saloon only (this is all one continuous piece). While ideally you would use this entire piece, it is now so cost effective that you could just use the particular section you need. Note: also includes a new battery box! (see listing for freight option) **EXTRA FREIGHT WILL BE REQUIRED, DUE TO SIZE** Price:
MS22- REAR LOWER VALANCE for saloon/sedan models Rear beaver panel, suit ALL round-nose/Leyland (square) front cars. This lower rear valance is without any fog lamp or wiring Extra courier charges will apply due to its size Price:
14A6940- REAR LOWER VALANCE for saloon/sedan models *Heritage* Rear beaver panel, suit ALL round-nose or Leyland (square) front cars, a bit better Quality beaver panel in Heritage brand!. This lower rear valance is without any fog lamp or wiring Price:
ALA5524- REAR VALANCE CLOSING PANEL R/H This is just the R/H rear valance closing panel. Price:
ALA5525- REAR VALANCE CLOSING PANEL L/H Left hand panel behind wheel arch with subframe mounting holes and splash guard panel to stop debris being thrown into rear valance- Price:
MS24R- BOOT SIDE REPAIR PANEL R/H These small repair panels (MS24L for left, MS24R for right) are for the Mini boot floor area around the shock towers. Price:
MS24L- BOOT SIDE REPAIR PANEL L/H These small repair panels (MS24L for left, MS24R for right) are for the Mini boot floor area around the shock towers. Price:
HMP441014- REAR QTR PANEL LOWER R/H SUIT ROVER Genuine heritage british part, The rear quarter outer skin from the B post back From below the rear side window down right hand and does not include the inner stifener waist rail. This panel is nearly identical to the 'mk1/2 body' minis, the only difference is the door aperture shape Extra freight charges will apply Price:
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
 |
