Current Category
K.A.D. Products

K.A.D. Race Items We are the AUSTRALIAN K.A.D. Distributor and with this comes some fantastic Mini products that will really give you that edge in either show/race/rally. K.A.D can be viewed at www.kad-uk.com but they will send you straight to us if you want to purchase anything as we have most of their product range in stock.  K.A.D has now made a huge statement with its race results around the world, don't trust any other product on your race mini. Insist on the best, Insist on K.A.D!

Call Sales/enquiries on: 08-8177-1275 or email us sales@minisport.com.au

	K.A.D Bottom gearbox rear mounting (adjustable) 1011370- K.A.D Bottom gearbox solid mounting kit (adjustable). Will really tighten up the engine and stop any movement, fully adjustable!		Price:	QTY:

	K.A.D rose jointed adjustable heavy duty tie rod bars (Race use) 1012265- KAD adjustable front tie rods Rose jointed radius rod arms, these are really only suited for race use only as rose joints are not normally allowed on road cars! Left and right hand threaded to allow adjustment of castor angles without removal of the tie rod from the car, Rod manufactured from EN16T steel, Greater resistance to bending than the standard items.		Price:	QTY:

	K.A.D roundnose model replacement bonnet prop KAD bonnet prop (roundnose models) in Alloy These bonnet props are great replacements for the roundnose bonnet props when they go astray, they don't fit clubman (square-nose)		Price:	QTY:

	K.A.D Pedal bias box, with adjustable cable and master cylinders 1012280 KAD Adjustable bias pedal box, with cable adjuster and cylinders Horizontally mounted, fabricated pedal box which bolts to existing brake master cylinder mounting studs, facing forward into engine bay. Enables the use of independent front and rear master cylinders with a balance bar assembly to adjust front to rear bias. Length, forwards into engine bay (to end of master cylinders) 255mm, width across 125mm, height to reservoir cap 145mm.		Price:	QTY:

	K.A.D. new improved quick-shift gear lever (ROD) BACK IN STOCK! KAD New Improved quickstick gear lever: The original type, devised by KAD in 1991, has been copied verbatim by so many other companies that we have lost count, we therefore decided it was about time to raise the standards and this has resulted in the new improved KAD Quickstick.		Price:	QTY:

	K.A.D. Moke New improved Quick-shift with lift-up reverse NEW MOKE TYPE, made exlusivly for moke, longer shaft, K.A.D Quickshift, with lift up collar for reverse, ROD CHANGE		Price:	QTY:

	Quick-shift to suit remote change gear stick (big alloy type) 1013218- KAD Remote gearstick quick-shift Remote change quickshift, the original type remote change stick remains in production. Fits pre 1973 gearboxes with cast aluminium housing extending from gearbox to gear lever i.e. Cooper S		Price:	QTY:

	Internal gear-stick set-up Allows gear change housing to be mounted inside the car. All of the parts for the conversion (except the standard gear change housing) are supplied. Gearchange rod runs through top of tunnel connected by universal joints		Price:	QTY:

	Mini Flywheel bolt, CNC machined from EN16 steel, competition grade 1011235 Flywheel bolt: CNC machined from EN16 steel: heat treated to V condition, competition grade		Price:	QTY:

	Mini flywheel washer, CNC machined from EN24 steel 1011230 Flywheel washer: CNC machined from EN24 steel		Price:	QTY:

	Mini crank angle sensor kit Crank speed sensor mounting kit The kit is designed to mount a 122.5mm diameter Ford pattern 36-1 trigger wheel to AHU1878  or Poly V type crank damper via a mounting hub secured by the crank bolt.		Price:	QTY:

	Mini adjustable oil pressure relief valve control 1011005 Adjustable Oil Pressure Relief Valve Replaces standard oil pressure relief valve and allows oil pressure adjustment on race rally and fast road cars where tuned engines oil pressure requirements are different to standard.		Price:	QTY:

	Mini steering rack limiter kit 1012230 Steering rack limiter kit Where a restriction in steering lock is desired, these simple nylon collars slip over the end of the rack limiting movement. Simple to fit, uses would include preventing 13” wheels fouling wheel arches, saving CV’s in rally or grass track cars or with 6 pot calipers.		Price:	QTY:

	KAD 5 speed racing gearbox, with LSD, CW&P, fully assembled KAD 5 speed Racing Gearbox The ultimate 5 speed gearbox on the market, fully assembled, with LSD diff, and crown wheel and pinion, full race specs, see description for all the info! This gearbox is a special order only item and a delivery time delay will apply, please either contact us at sales@minisport.com.au or call us on 08-8177-1275 to find out the delay Price may vary (not by much) if items are specialy requested eg diff ratio etc... Freight may vary depending on urgency of this item also		Price:	QTY:

	K.A.D. Alloy fly wheel (GOLD) and backplate KAD’s alloy flywheels and backplates are an essential fitment for any tuned engine. Most of the time, steel flywheels will friction weld themselves to the steel crank resulting in expensive damage to the crank taper, this is especially true with high revving engines.		Price:	QTY:

[1] 2 3 Next Page